Products >> Dental Chairside System >> Chairside Materials

Dental Stain & Glaze Paste

Product No.：SGP
Online Inquiry

CMEC Stain & Glaze offers a comprehensive range of high-quality stains and glazes designed for precise coloration and finishing of dental restorations. These products are formulated to enhance the aesthetic appeal and durability of zirconia, glass ceramics, and porcelain restorations, ensuring a natural and long-lasting result.

Application:

CMEC Stain & Glaze is specifically designed for use in dental laboratories to achieve accurate and consistent coloration on various dental restorations, including crowns, bridges, and veneers. The range includes dentine shades, incisal shades, pit and fissure shades, adjustment shades, gingival shades, and transparent glazes, catering to a wide array of aesthetic needs.

Operation Chart

Shade Category	Shade Name	Application Method
Dentine Shade	SHADE A	Apply evenly to the dentine area using a fine brush, ensuring complete coverage.
	SHADE B	Repeat application if necessary to achieve desired depth and color.
	SHADE C	Allow to dry before proceeding to the next step.
	SHADE D	● Apply evenly to the dentine area using a fine brush, ensuring complete coverage. ● Repeat application if necessary to achieve desired depth and color. ● Allow to dry before proceeding to the next step.
Incisal Shade	BLUE	Apply sparingly to the incisal edge for a natural translucency.
Incisal Shade	PURPLISH GRAY	Blend gently with adjacent dentine shades for a seamless transition.
Pit and Fissure Shade	ORANGE	Use a pointed brush to apply in the pits and fissures of the restoration.
Pit and Fissure Shade	BROWN	Ensure even distribution for a realistic appearance.
Adjustment Shade	TERRA/COTTA	Apply as needed to fine-tune the color balance.
	YELLOW	Use sparingly to add warmth or correct any color discrepancies.
	PURE WHITE	Apply to areas requiring additional brightness.
	LIGHT BROWN	Blend with adjacent shades for a natural look.
	MIDNIGHT	Use for darkening specific areas as needed.
Gingival Shade	RED	Apply to the gingival margin to simulate gum tissue.
Gingival Shade	PRINC	Ensure a smooth transition from the restoration to the gingival area.
Transparent Shade	GLAZE	Apply a thin layer over the entire restoration for a glossy finish.

Volume:

Paste: 4g/bottle
Liquid:10ml/syringe

Notes:

Always ensure the restoration is clean and dry before applying any stain or glaze.
Use a fine brush for precise application and control.
Allow each layer to dry completely before applying the next.
Regularly clean brushes to maintain the quality of the application.

iVista Stain & Glaze provides dental technicians with the tools needed to achieve exceptional aesthetic results, enhancing the natural beauty and longevity of dental restorations.

Sintering Chart

Bridge Body and Single Crown (Up to Three Units)

Parameter	Value
Sintering Temperature (°C)	730-750
Warm-up Time (min)	4
Drying Time (min)	6
Rate of Warming (°C/min)	45
Residence Time (min)	3
Cooling Rate (°C/min)	45
Opening Temperature (°C)	650

Bridge (More Than Three Units)

Parameter	Value
Sintering Temperature (°C)	730-750
Warm-up Time (min)	4
Drying Time (min)	6
Rate of Warming (°C/min)	30
Residence Time (min)	3
Cooling Rate (°C/min)	30
Opening Temperature (°C)	298

Notes:

The heating rate and cooling rate depend on the prosthetic unit, and the more prosthetic units, the slower the heating and cooling rate, otherwise the risk of bridge cracking and fracture will increase.
It is recommended to reduce the sintering temperature of the secondary furnace by 10°C.
The porcelain furnace needs regular maintenance and temperature calibration to ensure that the sintering temperature is set reasonably (there is a certain temperature difference between the actual furnace temperature and the program furnace temperature after long-term use of the porcelain furnace).
The technician can adjust the sintering curve appropriately according to the actual s

Next Product：Zirconia Block